Concentrate, up to -37 °C, suitable for aluminum engines, blue, boiling point 160 °C Nitrite-, silicate-, amine-, borate-, 2-ethylhexanoic acid- and phosphate-free OAT antifreeze based on ethylene glycol (MEG) with an additive package based on OAT technology. It prevents frost and corrosion damage in the cooling circuits of internal combustion engines as well as cavitation on pump segments and is particularly low-foaming. Inorganic and organic inhibitors are responsible for corrosion protection in the cooling system. It meets industry standards such as British Norm BS 6580, French standard NF R 15-601 and ASTM D 3306. Note: When changing, please drain and flush cooling systems and expansion tanks. The change intervals for radiator protection agents of the respective manufacturers must not be exceeded. The concentration should never be less than 33% and never more than 60%! Mixing table: Frost protection down to approx. - Mixing ratio concentrate : water -37 °C - 1 : 1 -27 °C - 1 : 1.5 -18 °C - 1 : 2 Instructions for use: Never use radiator protection concentrate undiluted, always mix with water. Pay attention to the correct mixing water (clean) and the correct mixing ratio according to the manufacturer's specifications (if in doubt, switch to ready-to-use mixture). Basically miscible with most radiator protection agents based on 1,2-ethanol (MEG), instructions from the aggregate manufacturers must be observed. For optimal corrosion protection and optimal inhibitor effect, always use unmixed product. Type Article Version Additives Area Frost protection, cooling system Frost protection down to -37.0 °C Container type Drum Main color blue Content 60.0 l Category Car, Truck, Commercial vehicles, Classic cars Fuel type Gasoline, Diesel, Gas Specification P11