For filling, flushing and bleeding modern electronic brake systems, 5 liters, for low-viscosity brake fluids. Variable pressure setting from 0.4 to 3.5 bar for all pressure ranges of leading car manufacturers. The working pressures are set to the desired working pressure with a rotary control and can be checked with a class 1.6 manometer. A special pump generates a pulsating fluid flow, which supports the complete flushing and bleeding of the brake system. It fills directly from the 5-liter canister, so no decanting is necessary. The canister is securely fixed in the device. The suction lance is securely held in the container with a rubber sealing cone. Through permanent pressure monitoring, the delivery pump is switched off when a container is empty, thus ensuring that no air can be pumped into the brake system. With a holder for the filling hose and the power cable on the side of the device, as well as receptacles for three bleed nipples on the back of the device. Incl. bleed nipple no.: 20. Technical data: Brake fluid capacity: 5 l Power connection: 230 V ~, 50 - 60 Hz Pump delivery rate: approx. 24 l/h at 2 bar back pressure Working pressure: 0.4-3.5 bar continuously Automatic pump shut-off: at approx. 9 mm remaining fill level in the container Connection cable length: 5 m IEC Filling hose length: 3.5 m Dimensions (H x W x D): 530 x 285 x 250 mm Noise level: 66 dB(A) Scope of delivery: device, operating instructions, bleed nipple no.: 20 Application Filling, bleeding, flushing Type Article Version Brake system Operating pressure 3.5 bar Area of application Brake / hydraulic lines Flow rate 24 l/h Main color black Height 530.0 mm Content 5000 ml Length 250.0 mm Secondary color blue Use Car