Soudal soudaseal epdm | colla ibrida | 600 ml - 130549

Soudaseal EPDM is a neutral, elastic, 1-component hybrid adhesive specifically developed for use in combination with Soudal EPDM Membrane facade strips in indoor and outdoor applications. Soudaseal EPDM is part of the Soudal Window System.Special characteristicsVery good adhesion to EPDM membranesGood adhesion to most common building materialsVery high adhesive strength (without primer) even on damp surfaces thanks to special adhesion promoters.Very easy to process, extrude (even at lower temperatures), and finish under all temperature conditions.Complies with GEV EMICODE EC-1R Plus: very low emissionsPermanently elastic after curing and very durableFree of solvents, halogens, acids and isocyanatesUV-resistant, waterproof and well resistant to weatheringFor indoor and outdoor applicationsApplicationFor bonding EPDM vapour barriers and sealing membranes in facade applications. For bonding and sealing EPDM membranes to each other as well as to shell construction, masonry, concrete, plaster, cement, aluminium, wood, etc. Particularly suitable for creating airtight connections to window frames.Instructions for useApply Soudaseal EPDM with a manual or pneumatic caulking gun, without interruption, in a bead of approx. 5 mm onto the substrate. Place the EPDM membrane tension-free into the wet adhesive layer and press it down. An uninterrupted adhesive layer with a thickness of 1 to 2 mm and a width of approx. 25 mm guarantees the best curing. Soudaseal EPDM can be removed from materials and tools with Soudal Adhesive Remover 90A, Swipex or white spirit before curing. After curing, it can only be removed mechanically.