Starter kit Tec7 foamtack pro build (3x 880 ml, detergente e pistola) - 670995000

This starter kit is your first choice for the certified bonding of load-bearing and non-load-bearing constructions made from dimensionally stable materials. FoamTack Pro Construct is a KOMO certified adhesive foam for all load-bearing and non-load-bearing constructions made from dimensionally stable materials such as calibrated rapid-build blocks, sand-lime bricks (silicate bricks), aerated concrete, or concrete blocks (non-load-bearing). This is a strong alternative to masonry or the use of powder adhesive. Due to its rapid curing and the prevention of moisture ingress, the wall can be finished almost immediately (plastering, window installation, etc.). Work can be done quickly, without mixing and without waiting times between layers of blocks. 1 can of FoamTack Pro Construct is sufficient for 6-8 m² of aerated concrete blocks (600 x 250 x 150 mm). FoamTack Pro Construct is a non-collapsing adhesive foam, ensuring optimal contact between the materials to be bonded, even with hollow blocks. It can be applied at ambient temperatures between -10°C and +35°C. With the included Spray & PUR Cleaner, you can effortlessly clean the gun for its next use. Special features: Get started immediately, with Cleaner and gun, KOMO approval for load-bearing walls, Fast processing, rapid curing, No mixing, no water needed, No waiting time between block layers, Stronger than mortar, Indoor and outdoor use, 1 can of FoamTack Pro Construct = 40 kg of cement = 7.5 m² of aerated concrete blocks. Standard delivery: 3 x FoamTack Pro Construct, 1 x Spray & PUR Cleaner, 1 x FoamTack Pro Gun. Documents: 670995000 Technical data.