Tester di accensione Tecmate ignitionmate turn tester ignitionmate

Peak Voltage Spark Tester with Dual Display for Troubleshooting Spark Ignition Systems Specifically designed for measuring and dynamically displaying primary and secondary ignition signals using bright LED bar graphs. For comparing two different signals on one cylinder. Reliably shows the condition of any ignition system, such as high voltage, capacitor, transistor, or simple contact ignition, whether digital or analog. Different ignition system types (AC-CDI, DC-CDI, transistor, magnet ignition, ignition coil, and ignition points) have the same basic components, and the measured signals are generally similar in nature and magnitude. Disassembly of ignition components is not required. (This avoids the accidental introduction or correction of faulty contacts into the system, which could further complicate and delay the solution of unidentified problems.) Two signals from the same cylinder can be compared simultaneously. Secondary high voltage/peak voltage 10, 20, 40 kV scales. Use the clamp to measure high voltage between the ignition coil and spark plug. Spark Current Measure the consistency of the high voltage spark current signal and identify/display misfires. 10, 40 or 400 Vpk scales with the RED and BLACK silicone test leads are used to measure primary signals between the ICU and power supply (battery or charging coil), control pickup (pulse coil or Hall sensor), ignition coil, and switches (key, kill switch, kickstand, throttle). Cylinders: 1 (two signals) Method: Comparison and display of two different signals on the same cylinder Display/Resolution: 2 displays with 40 very bright LEDs Selection/Setting: Left display: Selection between 20 kV and spark. Spark sensitivity setting. Right display: Selection of primary voltage 10, 40 or 400 VPK, selection of secondary voltage 10, 20 or 40 kV. Polarity of kV voltage: Single output coils have negative signals, double output coils have negative and positive signals. Main switch, including automatic shutdown if no signal is measured. Power: Rechargeable 7.2 V NiMH battery provides 6 hours of autonomy, external supply with 12 Vdc (11-15 Vdc). Design/Scope of Delivery: The standard set includes the instrument with a robust rubber protective cover, combination high-voltage signal clamp with silicone lead, ignition coil adapter, silicone test lead set with insulated alligator clips and probulator test probes, a 6 ½ ft / 200 cm long 12 V cable, and a manual with quick start guide. Accent color black Type item Version Spark plug Area of application Spark tester Main color red Secondary color yellow