Claresa Top Coat Shine 5ml

is a shiny, transparent top coat that leaves a sticky dispersion layer behind. This makes the topcoat perfect for adding nail decorations with glitter powder. The top coat is suitable for finishing gellak, gel nails and acrylic nails. The top coat smoothes the surface of the nail and spreads easily. The top coat also protects the nails against external factors and does not turn yellow under the influence of light. The Shine Topcoat Laaat a sticky Disperisie layer on the back of the nail after curing. Nageldecorations such as glitter powder and transfer foil can be applied successfully on this dispersion layer. After curing, this top coat must be taken with a nail cleaner to remove the sticky layer. Claresa has an extensive range of top coats that are suitable for universal use. For example, choose a shiny or matte finish or a top coat with shiny decorations. There is also a choice between top coats that leave a sticky dispersion layer or not. For example, a suitable top coat is available for every desired manicure finish. Use: apply the top coat over the already cured color layer. Hard out under a UV/LED lamp with 120 seconds hard time for a UV lamp and 30 seconds hard time for an LED lamp. Apply any desired nail decoration and end with another low top coat. Hard out under the UV/LED lamp and remove the sticky layer with a cotton ball with nail cleaner. Read the full user manual and instructions for removing gellak at the bottom of this page. Plus and downsides shiny transparent top coat with sticky dispersion layer at the rear perfectly protects the manicure against external factors does not become yellow universal use for hybrid gellak, gel and acrylic nails, the nail surface is quickly hied under a UV/LED lamp that has a sticky dispectation that the dieselieeliekje is sampling. And file them in the desired shape, Step 2: Remove the shine from the natural nails with a polishing block, step 3: Push the cuticles back with a goat boat and possibly remove them with a cuticle tongs, step 4: Clean the nails and dust -free with a cleaner and wait until the nails are dry. Wait until it is dry, this takes about 30 seconds, step 6: apply a thin layer of base coat and hard the nails under a lamp. Depending on the Basecoat 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, step 7: Apply one thin layer of the hybrid gellak and hard the nails under a lamp. 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, step 8: If desired, apply a layer of hybrid paint and repeat the above step until the desired coverage is reached, step 9: apply a topcoat and hard the nails under the lamp. 30-60 seconds under an LED lamp and 2-3 minutes under a UV lamp, Step 10: Then clean the nails with a cleaner to remove the sticky layer, step 11: Massage the skin around your nails as extra care with a caring nail cream or cuticle oil. Note: More pigmented colors, such as black and white, may require a longer curing time. It is important to apply these layers thinly and, if necessary, to paint and harden a second time to achieve the desired coverage. Removing the Claresa UV/LED Hybrid Soakoff Gel nail polish: Step 1: Carefully file the topcoat off the nails, Step 2: Soak a cotton pad in nail remover and place the cotton ball on the nails, Step 3: Make sure that the nail plate is completely covered. You can use nail remover foil for this. Wrap your finger firmly here, step 4: Check after a few minutes if the paint is loose. If this is not the case, Then wait a little longer, Step 5: When the gellak has been released, remove the remains with an Orange Woodstick, Step 6: After removing, use a hand cream and a cuticle oil for the optimum care of the hands. Ingredients: di-hema trimethylhexyl dicarbamate, hydroxypropyl, methacrylate, hema, silica, hydroxycyclohexyl phenyl ketone, ethyl trimethylbenzyl, phenylphphinate, CI 60725.