Special featuresStable: Rigid design with guide column clamped on both sides for optimal routing resultsPractical: Tool-free change of copying rings and base runners for various applicationsConvenient and quick cutter changes: Thanks to the spindle stop with ratchet principle, there's no need to reposition the open-end wrenchOptimal visibility: Thanks to extraction hood with integrated LED light ringPrecise: Simple and 1/10 mm accurate fine adjustment of the routing depth - with a large adjustment range of 20 mmClean: Up to 99% extraction with chip catcher and extraction hood when routing edgesSafe: Quick brake and MMC Electronic for material-specific work and speed control Technical dataPower consumption: 1,400 WNo-load speed: 10,000 - 22,500 min⁻¹Collet diameter: 6 - 12.7 mmRouting depth quick adjustment: 70 mmRouting depth fine adjustment: 8 mmTable opening: 63 mmDust extraction connection Ø: 27/36 mmCable length: 4 mRouting: Uncertainty (vibration) K: 1.5 m/s²Routing: Uncertainty (noise) K: 1.5 dBRouting: Total average vibration value ah: 2.5 m/s²Routing: Standard series EN: 62841-2-17Routing: A-weighted sound pressure level LpA: 98 dB(A)Routing: A-weighted sound power level LWA: 106 dB(A)Product weight without accessories: 4.6 kgTransport weight with accessories: 9.3 kgDrive type: Mains power Standard accessoriesextraction hood with light module LM-OF 1400collet Ø 8 mmcollet Ø 12 mmside stop with fine adjustmentcopying ring Ø 30 mmupper extraction hoodchip catcherspanner SW 24plug it-cable (4 m)Systainer SYS3 M 337