Special characteristicsStrong adhesion in 15 minutesAlso bonds difficult materials: PC, Plexiglas, bluestone, EPDM,…Horizontal, suspended and vertical bondingCures from -10°CEasy to pressFunctional strength on porous materials after 15 minutesFunctional strength on non-porous materials after 2 hoursOn dry and damp surfacesPermanently elastic in the long termAlmost odorlessFree from toxic substances such as isocyanates, solvents and phthalatesWater and airtightGood UV resistanceTechnical dataBase: NTec hybrid polymers.Curing: Polymerization with (air) moisture.Odor: neutral.Density: 1.52 +/- 0.1 g/cm³.Processing temperature: -10°C to +30°C.Thermal stability: -40°C to +90°C / peak 200°C (max 20 minutes).Skin formation: 3-5 minutes.Tack-free: 6-10 minutes.Functional strength (hand-tight):Porous materials: 15 minNon-porous materials: 2-3 hoursFull cure:24h – 6mm7d – 14mmVolume shrinkage after curing: < />E-modulus 100% (DIN 53504 S2): 200N/cm² / 2.00 MPa.Elongation at break (DIN 53504 S2): 200%.Shore-A hardness (DIN 53505): 60.Tensile strength (DIN 53504 S2):After 7 days: 270 N/cm² (= 270 kg/10cm²)After 3 months: 300 N/cm² (= 300 kg/10 cm²)Chemical resistance:Good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, alkalisModerate: esters, ketones, aromatic solventsPoor: concentrated acids, chlorinated solventsWeather resistance: very good.Shelf life: 15 months from production.The first seven digits of the batch number form the production date: YY WW DDD, where YY = year (24 = 2024), WW = week and DDD = daySafety measures: please consult the safety data sheet.DocumentsSafety data sheet