Product Description Specifications:Function:screwdriverTool Type:Bit, special toolType:hex tool, Torx, phillips head screwdriverDrive:Hexagon 1/4"Technical Information:Material:steelHandle Shape:T-shapedFeatures:magnetic bit driver with T-handle8 common bits in magnetic holderquickly change bits with one handbit holder can be attached to any magnetic surface, e.g. repair standalternatively, fixed mounting on the wall is possibleholder has two empty spaces for additional 1/4" bitsApplication:1. To select a bit from the holder, put the end of the driver on the bit until it is picked up by the magnet. 2. If necessary, turn the tool slightly so that the bit is fully seated in the tool. 3. To detach a bit from the tool, guide the bit back into the bit holder so that it makes contact with the magnet. 4. Meanwhile, pull and hold the trigger. 5. Pull the driver away from the bit holder so that the bit remains in the holder, release the trigger. Note from the manufacturer:For QTH-1 to work properly, the bits must be inserted into the holder with the drive side down. Manufacturer Number:QTH-1 Contents:ParkTool QTH-1 Quick-change T-handle Set, consisting of: 1 x ParkTool bit driver1 x ParkTool bit holder1 x hex bit, 2 mm1 x hex bit, 2.5 mm1 x hex bit, 3 mm1 x hex bit, 4 mm1 x hex bit, 5 mm1 x hex bit, 6 mm1 x T25 Torx bit1 x Phillips #2 bit Manufacturer: Park Tool Company 1185 Eagle Lake Rd Shoreview MN 55126 USA info@parktool.com Distributor: GROFA Action Sports GmbH Otto-Hahn-Straße 17 65520 Bad Camberg Germany info@grofa.com