Fischer Injection Mortar FIS VS 150 C - 45302 DescriptionThe FIS V injection mortars are approved for many systems, such as in cracked and uncracked concrete, masonry, and for rebar connections. This makes FIS V the universal injection mortar family with guaranteed safety for almost every application. FIS VW HIGH SPEED has a significantly shorter curing time than FIS V, ensuring rapid work progress even at low temperatures. FIS VS LOW SPEED, with a longer processing time, prevents premature curing of the mortar at higher temperatures and is ideally suited for deeper drill holes. The extensive range of accessories is optimally matched to the FIS V injection mortar family, increasing the system's high degree of flexibility and thus enabling a wider range of applications. FIS V is a 2-component injection mortar based on vinylester hybrid. The resin and hardener components are stored in two separate chambers and are only mixed and activated in the mixing nozzle when extruded. The mortar is injected bubble-free from the bottom of the drill hole. The mortar adheres the fastening element with its entire surface to the wall of the drill hole, thus sealing the hole. The injection cartridges can be used with little effort and particularly quickly in combination with fischer's caulking guns. Opened cartridges can be reused by replacing the mixing nozzle. Approved for anchorages in:Concrete C20/25 to C50/60, cracked and uncrackedHollow block made of lightweight concreteHollow block made of concretePerforated brickPerforated sand-lime brickSolid sand-lime brickAerated concreteSolid brickApproved for:Rebar connectionsRenovation anchor VBS 8Renovation system FWS IIThermal separation TherMaxSteel structuresTimber constructionsHandrailsFaçade systemsStairsSteel consolesMachinesPolesAwningsAwningsFencesConsolesPipelinesTrellisesSatellite dishesScope of delivery1 piece(s)