Emtor BF-5200 is ideal for turning, drilling and milling steel, cast iron, stainless steel and aluminum. The concentration of the emulsion can be determined with a refractometer. The measured °Brix value X refractometer factor = concentration in %. Storage: Protect from frost, heat and direct sunlight. Recommended temperature for storage and transport: 5 - 40 ° C. Mixing ratio (refractometer factor 1.5) Steel, cast iron and high tensile steel: 8% Aluminum alloys: 8% Emtor BF-5200 is a high-quality water-miscible, boric acid-free, amine-containing EP metalworking fluid for universal machining of a wide range of metals, including steel, cast iron, aluminum and stainless steel. Emtor BF-5200 is particularly characterized by: Good anti-foam behavior Completely boric acid and biocide-free High rinsing effect Extremely finely divided, highly stable emulsion Good corrosion protection Excellent 'EP' properties Dermatologically tested, good protection against skin conditions Long emulsion service life possible, resulting in minimal maintenance Typical standard analyzes Density at 15 °C 0.990 kg/l Viscosity 20 °C 114.00 mm²/s Flash point PM 120 °C