Leifheit Droogmolen Linomatic 400

The Leifheit Linomatic 400 laundry mill is equipped with the Leifheit Mechanism that moves on the lines when folding. The mill has a light, open design with fresh turquoise details.

Like all Linomatic dry mills, the lines are encapsulated in the arms when it is folded and are therefore protected against dirt and the weather. When closing the Linomatic, the lines disappear and at the following use they automatically appear so that they remain dry and clean at all times. An additional advantage: the laundry dries in the wind without extra energy costs. Thanks to the Easy-Lift system, this drying rack can easily be opened and closed with up to 40% less effort. Pull the tension line and open the arms. Due to the small locking units, the lines remain tight even after years of use.

The drying mill has a total line length of 40 meters and therefore offers a maximum of 4 loads of laundry. The Linomatic provides sufficient drying space, even in small gardens and on patios. It is big enough for larger laundry, such as bedding, tablecloths and bath towels. All materials used are weather-resistant and UV-resistant. A soil sleeve is included in the delivery.

• Color: Silver and Green
• Material: Aluminum
• Line length: 40 m
• Diameter pole: 50 mm
• Line length (each): maximum 1.86 m
• Drying mill with mechanism that moves on lines
• After folding, the lines are in the wearing arms and are so protected against dirt
• With Easy-Lift system to be able to open and close effortlessly
• Weather and UV-resistant
• Delivery contains:
• 1 x Ground sleeve
• ground anchors
• 15 x clothes peg

Safety information: The Linomatic Droogmolen from Leifheit is only intended for household outdoor use and may only be used according to the information provided in these instructions. Inappropriate use is prohibited. Be particularly careful when there are children in the area, since they can be secured by the lines. To prevent strangulation and to prevent the lines from becoming entangled, the drying mill may only be used by adults. The lines can get wrapped around a child's neck. Do not tie the lines together. Make sure that the lines do not run together or form loops. Check the drying mill and the voltage wire for any use for damage. A damaged dry mill may no longer be used. Before you open the mill, make sure that the ground anchor is switched on to its counterpart on the vertical tube. 2. To open, pull the lifting cord up in a corner. When the first resistance is overcome, the roof and the Sun Sail can easily be pulled up until the desired cloth voltage is reached. 4. By pushing the sliding coupling up, the clothing lines can be tense again if necessary. 5. The crank button can be attached to the sliding coupling. Open GB: The dry mill must be checked for damage for each use and may only be used if it is in error -free condition. Make sure you are firm before you open the mill and that there are no articles or obstacles behind you. 1. Before you open the mill, make sure that the ground anchor is switched on to its counterpart on the vertical tube. 2. To open, pull the lifting cord up in a corner. 3. If the first resistance is overcome, the dry mill can easily be pulled up until the desired line voltage is reached. 4. By pushing the sliding coupling up, the washing lines can be tense again if necessary. P Open: Before using the drying mill, check that it is in perfect condition and does not show any signs of damage. Make sure you are firm when you open the mill and that there are no objects or obstacles in the way. 1. Before you open the mill, make sure that the ground anchor is locked to his counterpart on the vertical tube. 2. To open, pull the lifting thread in a corner. Ba Linoprotect 400 Langdin.indd 10 31.01.17 13.53 If the voltage wire becomes rougher or becomes damaged, or if it is unusually difficult to pull it, the drying mill may no longer be used. If a drying line touches between the plastic covers: gently push the line back into the U-shaped channel. Never remove the plastic cover! If a line is turned around the center tube, a rotary arm or the cover: lift the drying mill slightly and bring the line back into place. When the lines have become wet: let the lines dry while the drying mill is folded out. The dry mill is not suitable for use with strong wind (from wind force 6) or with a thunderstorm.