Transform your bathroom into a wellness oasis with the high-quality STRASBOURG overhead shower from SCHÜTTE!

This shower system is made of brass and is designed to last. The unique flat design of the wellness overhead shower and its extra-large size ensure a wonderful showering experience.

In addition, the ball joint and connection are included, making it easy to install.

• Color: stainless steel
• Material: brass
• Flat shower head dimensions: 20 x 20 x 6.6 cm (L x W x H)
• With ½" (Ø approx. 1.9 cm) connection
• With ball joint
• Anti-limescale sprayers
• Short water shut-off time

Safety Information · Have installation carried out only by qualified personnel. · WARNING: WATER DAMAGE! Turn off the water supply before installation. · Ensure all gaskets are the correct size. · These taps are not suitable for low-pressure use or for small electric water heaters. · We recommend installing a filter in the appliance, or at least using angle valves with a filter, to prevent the ingress of foreign materials that could damage the cartridge. · This tap is intended for domestic use only! Suitable only for use in rooms with a temperature above 0°C. If there is a risk of frost, turn off the water supply and drain the tap. · Be careful when using hot water. Danger of burns! · Incorrectly installed fittings can cause water damage! · Do not allow the connecting hoses to come into contact with caustic or corrosive products, such as dishwashing liquid or household cleaners, as this can cause water damage. Despite careful manufacturing, the product may have sharp edges. Be careful! Your sink faucet is delivered in solid packaging to protect it from transport damage. The packaging is made of recyclable materials. Please dispose of it in an environmentally friendly manner. Do not dispose of the product with residual waste at the end of its life. Ask your local authority about environmentally friendly disposal options. Technical specifications Flow pressure: recommended 1.5-6 bar. For connection pressures exceeding 6 bar, we recommend installing a pressure reducer. Water temperature: max. 80°C. Installation instructions Tighten the connection hoses by hand only. Do not use pliers or wrenches! After installing the faucet, loosen the nozzle. Let the pipe and faucet run for a while to flush away any contamination and residue. Do not twist or apply tension to the pipes! Before first use, check that all connections are tight! After first use, thoroughly check all connections to ensure they are secure. We do not offer any warranty for improper installation and any resulting damage.