This wall bracket is the ideal attachment for wire rope hoists with swivel arms.

This arm bracket is made of quality steel and can be loaded up to 1,000 kg. The wall bracket gives the swivel arm the necessary distance from the wall. This maintains a swivel range of almost 180° without the winch hitting the wall. Thanks to the pre-drilled holes, the wall bracket is easy to attach to the wall. Mounting screws are included in the delivery.

The product must be attached to the wall using 8 M12x120 mm expansion bolts. Make sure the wall is a solid supporting structure. Solid walls provide strength and stability. The wall must be made of solid bricks, stones, concrete, and reinforced concrete. Reinforced concrete and aerated concrete must be layered. The supporting wall must have a strong structure, without cracks. Its thickness must be at least twice the length of the expansion bolt, it must be more than 22 cm (220 mm) thick, and the structure must be able to support more than 1.5 tons of weight. DO NOT MOUNT THE PRODUCT on steel plates or frames, or on walls consisting of hollow or perforated bricks, nor on walls with crossbeams or other non-load-bearing walls. Before use, check that all mounting screws are securely fastened. The parts of the bracket and the bracket itself must not show any cracks. DO NOT OVERLOAD. Overloading is strictly prohibited. DO NOT LIFT PEOPLE OR ANIMALS. It is strictly forbidden to lift people with this hoist. Do not stand under the hoist to avoid accidents! Inexperienced persons and persons unfamiliar with the safety instructions must not use the product to avoid accidents. IMPORTANT: only electronic hoists are permitted. GPSR